The Mirage Dig Evolution processor is fully digital audio processor, powered by DSP technology.
- Digital AES/EBU & Optical Inputs & Outputs
- Balanced Analog Inputs & Outputs
- AES/EBU standard, 24 bit resolution
- UltraLow Latency Structure (only 3 ms delay)
- Four Bands in multiband compressor process
- Switcher with selectable backup audio sources
- Intelligent Silence Detector and Backup Audio
- Headphone output
- Four-bands AGC control
- Eight-bands Equalizer
- DSP processing powered
- Digital Stereo MPX Coder
- Software PC control
- Ethernet control
N-Com Website Product Enquiry Form (AEV Mirage FM/AM Audio Processor)
Please enter your contact details & telephone number, along with your enquiry, and a member of the N-Com Team will get back to you ASAP.
- Digital AES/EBU along with Optical Inputs & Outputs
- Balanced Analog Inputs & Outputs
- AES/EBU standard, 24 bit resolution
- UltraLow Latency Structure (only 3 ms delay)
- Four Bands in multiband compressor process
- Switcher with selectable backup audio sources
- Intelligent Silence Detector and Backup Audio
- Headphone output
- Four-bands AGC control
- Eight-bands Equalizer
- DSP processing powered
- Digital Stereo MPX Coder
- Software PC control
- Ethernet control
| Frequency response: | 20Hz ÷ 15 KHz FM version 20Hz ÷ 20 KHz HD version 20Hz ÷ 10 KHz AM version |
| Stop Band Rejection: | > 78 dB above 17 KHz |
| Noise: | > 65 dB in all conditions (depends on the processing) |
| Total distortion @ 1 KHz: | Than less 0,05% |
AUDIO INPUT: |
|
| Configuration: | Left and Right |
| Impedance: | 10 KΩ/ 600Ω balanced |
| Maximum Input level: | +15 dBu |
| Sensitivity: | ±12dBu |
| Connector: | XLR Female |
| DIGITAL INPUT: | |
| Digital Input Configuration: | AES 3 professional (IEC-60958) |
| Digital AES 3 Input Impedance: | 100 Ω balanced |
| Digital AES 3 Input Connector: | XLR Female |
| Sample Rate Automatic lock: | 32 – 44.1 – 48 – 96 KHz |
| Resolution: | 24 Bit |
| ANALOG AUDIO OUTPUT | |
| Configuration: | Left and Right. Flat or pre-emphasized (50μS – 75μS) |
| Impedance: | 30 W electronically balanced and floating |
| Minimum load impedance: | 600 Ohm |
| Maximum output level: | +15 dBu into 600 W load |
| Connector: | XLR-type, male |
| DIGITAL OUTPUT | |
| Digital Output Sample Rate: | Software Selectable 32 – 44.1 – 48 – 96 KHz |
| Resolution: | 24 Bit |
| Digital Output configuration: | stereo AES 3 Transformer Balanced (IEC-60958 |
| Digital Output Impedance: | 110 Ω Balanced |
| Digital Output Level : | – 12.00 / 0 dBFS adjustable |
| Digital Output Connector : | XLR Male |
| DATA | |
| Terminal Interface: | Ethernet / RS232 |
| Data Input: | Full duplex |
| Format: | Selectable |
| Serial Transmission Speed: | 2400 ÷ 19600 baud |
| Connector: | RJ45 / RS232 / USB |
| Data management: | Microprocessor controlled |
| LOGIC I/O | |
| Connector | DB15 cannon female |
| GENERAL DATA: | |
| Power supply: | 90 – 260 VAC 50-60 Hz |
| Dimensions: | (WxHxD) 48,3 x 19,4 x 4,4 cm 1 rack unit |
| Weight: | 3.5 kgs |
| Operating Humidity: | Max 95% non condensing |
| Operating temperature: | 0 – 50 °C |
